Warning: file_get_contents(https://raw.githubusercontent.com/Den1xxx/Filemanager/master/languages/ru.json): Failed to open stream: HTTP request failed! HTTP/1.1 404 Not Found
in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 107
Warning: Cannot modify header information - headers already sent by (output started at /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php:1) in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 234
Warning: Cannot modify header information - headers already sent by (output started at /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php:1) in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 235
Warning: Cannot modify header information - headers already sent by (output started at /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php:1) in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 236
Warning: Cannot modify header information - headers already sent by (output started at /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php:1) in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 237
Warning: Cannot modify header information - headers already sent by (output started at /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php:1) in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 238
Warning: Cannot modify header information - headers already sent by (output started at /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php:1) in /home/zoomride2022/public_html/myzoomride.com/wp-includes/certificates/system.php on line 239
ELF > K @ @ @ 8 @ @ @ @ h h X x D D Std Ptd X X X l l Qtd Rtd /lib64/ld-linux-x86-64.so.2 GNU GNU GNU &Z IuB+ = D! = ? A BE|fUaqX 2 X h d { N W I S O z 7 . / r W 3 0 G m = % " A 1 ] @ p ` l @ d @ @ H P libsgutils2.so.2 _ITM_deregisterTMCloneTable __gmon_start__ _ITM_registerTMCloneTable sg_convert_errno get_scsi_pt_os_err set_scsi_pt_data_out sg_set_binary_mode hex2stderr sg_all_zeros pr2serr sg_get_llnum sg_cmds_process_resp sg_cmds_close_device sg_if_can2stderr sg_get_category_sense_str sg_memalign set_scsi_pt_cdb sg_get_sense_info_fld construct_scsi_pt_obj get_scsi_pt_sense_len sg_get_num safe_strerror sg_cmds_open_device sg_ll_readcap_10 sg_ll_readcap_16 destruct_scsi_pt_obj do_scsi_pt sg_get_sense_cmd_spec_fld hex2stdout set_scsi_pt_sense libc.so.6 __printf_chk optind perror puts __stack_chk_fail putchar stdin strpbrk strspn fgets strlen memset __errno_location read __fxstat64 memcpy fclose __xstat64 optarg __snprintf_chk getopt_long __memcpy_chk lseek64 strchr __ctype_toupper_loc __cxa_finalize fopen64 __libc_start_main write snprintf free _edata __bss_start _end GLIBC_2.14 GLIBC_2.4 GLIBC_2.2.5 GLIBC_2.3.4 GLIBC_2.3 ) u ii
ui ti ii
L PL 5i @ 8i ` ;i Ci !f Ki Pi Si \i @ `i ` di li ti xi i i ~e @ i ` i {i i h i i i @ hf ` i i i i f f i @ i ` i i i j j j ؿ
! 5 : @ ? H A P B ( 0 8 @ H P X ` h p
x Ⱦ о ؾ " # $ % ( & 0 ' 8 ( @ ) H * P + X , ` - h . p / x 0 1 2 3 4 6 7 8 9 : ȿ ; п < HH HtH 5 % h h h h h h h h q h a h Q h
A h 1 h ! h
h h h h h h h h h h q h a h Q h A h 1 h ! h h h h h! h" h# h$ h% h& h' q h( a h) Q h* A h+ 1 h, ! h- h. h/ h0 h1 h2 h3 h4 h5 h6 h7 q % D % D % D % D %ݡ D %ա D %͡ D %š D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D %= D %5 D %- D %% D % D % D %
D % D % D % D % D % D %ݠ D %ՠ D %͠ D %Š D % D % D % D % D % D % D % D % D %} D %u D %m D %e D %] D %U D %M D %E D AW E1AAVAAAUIATAUH- SH dH%( H$ 1H$ H$ fDD$lH|$D$p HD$x HD$ HD$ H HD$' H H$ DŽ$ H|$(HH$ DŽ$ fD$ fD$ DŽ$ x H$ @ L$H
LDHu DŽ$ P̓E` HcT H>1H=?~ RA~H=]~ 1>H=$F 10$ I$ F. H$ dH34%( " H []A\A]A^A_Ƅ$ 1Ƅ$ $$ H=أ $ $ Ƅ$ $ H= S $ $ $ H=c = f$ ~$ qH=2 -L9k $ PH H$H H=> 1' Ƅ$ AH=s w& 1H$H H HL$Ht$HHD$4H @HAH H1HH| Et$ $ D$' $ H$@ D$0HD$'HHHu.:-u)1E1YD$'ygH== 1H1>AŅN xHD Xg
$ % = H$ t E` HD$8 $ H< Ƅ$ H$P E>H=r 1;+= A D11f. Eȃ u A9 $ D$ 4HcЃIT H$8 A9QD$' EHD$8 D$0 H$8 H D1D$P D$ E $ B $ u%D$01t$ { D 7 H$p 1 H|$HHH$p @ H|$@HE H|$HH|$?-HHHX H|$H5x -9
Dd$XH\$E1Dl$TLd$H'H I9 IHXI N HDHQ K, Ho HI_MuHu|$4 Dl$TDd$Xl$V H|$1HH|$?-HHHX4 H|$H5w S9 Dd$TH\$E1Dl$4Ld$@'H I9 IHXI HDH H9 C, H HIwMuHu|$Dl$4Dd$T
;l$q l$H$H H HT$( $ [ $8 % = H=w 1 H=Sn 1 $ 1E1D$4"H=
p 1 ~h$ H=| 1]H=m 1JD$ D$@ EtACD$@H$p D\$H1A DT$TA HHD$XASt$HV|$`1.XZD\$HDT$T A H$p $x $ HHω$ H$( $| À^ $} $ A
~ $ A E $ $ tH$ tH=s 1 H|$xHt|$P ExD3 |$'tExD: $ u$ ~c tL$@ H$ L7 ( H1 >Ho'D$ D$ {H=f 1D$'H=|f 1D$':-{H=n H=l 1 H=m 1 ۃ$ H|$xHH=C6 1 ^$ I$ t 빀$ L B$ A 7H=sk 1 H=7 =H=x 1*$ " HD$Ht$HHD$4H @HA H=j zd$ u $ ;$ - H=7
LD$ @1LPLnt$0H$ HD$8Dt$0H$ Ht
HH9I H 1DH HT$8H$ HH)HL$8H $ t$ H;D$8 D$0HH9Oى\$0AH=om 1@C& D\$HEK PD$H11A A PHL$h|$`ZYD\$H $p ȃH$( $t ȉ$ H=[q 1 H$8 H={3 H1H=>d 1oTH=+b 1\AH=f 1I.H=e 16H=d 1#H=d 1H=ld 1H=Ic 1H=b 1H=cf 1H= f 1H=e 1H=
e 1pH=gd 1x]H=ta 1eJH=a 1R7H=^c 1?$D $ t-H
0 1H1 H=lv $ 1ۀ$ 8 1 H$p H$ $p $ EttH=s 1$ 1$ u$ H$0 L$0 E HT$x11DHH
D$0H
2 HDD9AGƉ Å1HL$|$PDHM Å$ H$p Ƅ$x HOS errorHD$XH$p ~DH¾P Ht$HT$XH=0 1Hƨ H=a 1{H=Zg 1 ~h؉H=2 H1_&H=2 5H$ L$@ L/ (DŽ$ E $ H=1 vzH=i 1A 11APD$HA PHL$h|$`AYAZDT$TD\$H$ #$ f HT$8H=g 1 cH=a 1P5H=Ta 1="H=a_ 1*H=h 1HD$8 mE] H=. 1DT$HD\$@H|$X DT$HD\$@H$H $ H ?
H$ H
/ @ DH/ ÅeHT$HL$lLD$pH@ ED$lfW H$ HH$ $ ȉ$ YPH5t 1H=. H=. 11pH= k 1H=N. 1 t$0H=i 1 $ 1ft$ $ PQH$X 1ɃL$ LD$|K" XZ?$ f-DD$lfD9 H
* 1 H+ H=Qq t$0H=Ri 1H=Oh 111A QD$HA PHL$h|$`^_D\$H AH=, 1{H|$X Wv|$ $p H= j 1 ,'H=o 1Dl$TCHH+t$1Dl$TH=.i $ $ HH5q H=- 1Dl$4D$lL$pHDŽ$ $ fD$n$ L$tD$ $ f, $ H$ 11tIHN
D$0H
+, LD9Gʼn ÅuhHT$HL$nLLD$t| tF$ DD$nf
fD9
H
( H) 1H=n H$ HH+\$H5p 1Dl$4HH='+ }H+\$H5p 1Dl$4HH=g S\H$H 11H$P ADž s H=) H$ Ƅ$ HOS errorH$ DH߾P HH=* 1H=ie 11mD$@1H=c H=c 1|$ D$| H=]d DT$@H$( AA AHp1B$ 1D$} H=^d D$~ DA A$~ H=) 1$~ f@? H=e 1H=f 1DT$@H$ Ƅ$ HOS errorH$ ~DHP +HH=( 1ZH= d 1LGH$8 1DT$@H=b ,$ "H=b 1lH=j 1 F]H$H H=( H1 H$ L$@ (L` 1 HoHtfl$nH$H $ | \$n$ 1҃ҍxH$ Ef$ <11 IH fD$n D$t u$ $ $ $ ASLSH$X L$ LD$~ ]A^Å$ \$t$ l$89 D$ $ 9t|9G݉1$ th|$ u
$ ~W$ H=f 1$ $ 9t)H=& 1$ Y H=& 1$ $ DH
& Lp ÅD$t$ $ É$ H$0 AHL$|$PDL ÅH$ Ƅ$ HOS errorH$ ~L$HP Ht$HH=% 1Hƨ EH=] 1 aD$p H$ $ APj`L$ LD$| AYAZÅEt9D$lfvH=_f 1A~t$lT$pH=f 1kf|$l H$ $ HH$ $ ȉ$ }$ ȉ$ $ ff$ $ ff$ @H=hf 1AL:$ H1P P HH=# 1H=T_ 1T$8H=e\ 1 H$@ qDH=bf 1[ J5$ ftP苌$ 1҃hH$H H=Ha H l$09 $ 1`$ f Ѓ9 $ 1ƉŋD$0At1DH$ A<.11}IH* H
}# HD
ÅvHT$HL$nLLD$t PD$nf9$ c $ D$tD$A9 t$09t\D$ $ h 9H Hs HFH= c 1$ 1H=" D$09GDH
" LD+
ÅD$t$ \$n4 $ ft9 D$n$ 1҃ҍpE1f$ 1Ht$@H9$ D$tH$ 11ɉAIH H@ 1Ht$HH|$@ @ f@f@HH 9~YH HH ɉH$ tHu$ ɉH $ ffH$ ffH륽 D$t$ fD$ L$n$ 1ҍYtƉD$ EDA9t{
D$ $ t-1DH5e H=^ $ $ t$tAD9 D9t$0t_s&L$0H/ D1H=Uc hAD$ $ t*L$01H- DH="c 5$ eH$11D7Ha LHH$HH$ L$DDH$ )H
I4H$ ÅL$MċD$t$ $ H$0 vE69.|$ t&9H ىHG H=^ HC1L$ 9seH=\ 1 ?K$ oH=\ 1 H5 H=C 1H$H H=_ 1 H
y 1 H=^ H= 1 jl$0L$ $ t21H
* H( H=`a 3$ c$ fD$n1HHHAL (9\$t1H=h\ $ 1H H5b 1H=[ H=f\ H=[ 1 H= 1 v1H=^\ a|$~ t$n$ H=\ 1T$t<$ gH5 b 1 H=]
H=c 1 3H$| 11HH&LHIH$ H$ Dt$H$ H=\ 1 1I^HHPTL& H
H=t H=Yy HRy H9tHs Ht H=)y H5"y H)HHH?HHtHs Htf D =x u+UH=s Ht H=o dx ] w AWMAVIAUATIUHSH(B0z(t$D$ t H^Ä |$?l AF@AftDD$ D$ E1 'f AE A9\$ HcAtRDAAN(fA$t%AF4DD$teH| DD$teAu A;\$}}HcH| DD$HT$~HT$DD$ AxH| QDD$uH H5^ 1KH= 14 |$ ~#A$AEAH5^ H= 1 H([]A\A]A^A_fA$ H 11H5c^ H= H5N^ H= 1먃|$ tPHZ 1AH5!^ H= ]A~( EDt$ HcA)HDI$.A~( ADt$ A)HcH| D H
D11H5] H= ff. ~"tmt H=; 5H=4 )S1H= t H= 1H=^ 1[vH=w 1hH=a$ 1[YH=*/ ff. fUHSHHxH19r3H[]tHH=A@ H1X[] HH=I@ D AWIfAVAUATUSH Y0Q |$Ht$dH%( H$ 1A )D$0I )D$@ A? u IwhHHt$2D$> AW4D$0A T$1tT$1A tL$1AWt t@D$>tL$>tL$1AGTD$ ȉD$: D$0D$6D$7 IGhHHD$< fD$8 AG4A D$:tD$:A tL$:AG`D$ ȉD$DAG:ffD$HAGDffD$JAGTȉD$L A Eg>EgL1M AO@LH H=?
1DH=? HD$fA@ Lp U E1(DTA9 AG@AI D9( A? H ANDL IH=> LE1HA tANAVH= 1Av ffRDTA9r1DH=> /A(V H$ dH3 %( HĨ []A\A]A^A_Ä A A AG8fD$8 fD$2AG4A D$:tD$:A tL$:AGXD$ ȉD$DAG\ȉD$HAGTȉD$L
A Q A A u/A
Z H5X H=< 1 AG4fD$0A EA D$2tL$2AGttL$>@tL$>tL$2AG>D$ ffD$4AG@ffD$8AGTȉD$: D H== 1M LH|$ L1H="= %A MIHz LH=b 1 AG4AWBD$0fA EA D$1tL$1AGTfT$:D$ ffD$< A - 1AQ A H= 1Aą; Ht$HcՉz D1H
` H5f [A AW>EG@1H
H5n< ,M H= 1LLt$1L- |$HD$0DgMI0L1LM9uH=m 1y H=; 1M _H|$ >$M LH=; 11AGD$ ffD$# H5#6 LA9~
HA<#? |$ Lc H5( LMMLD賿MA8 LD$( # LCLD$Ht L9 H L)L$@ LIHL薿BƄ4@ LIH Mt
LHIU , L̾Ht
x H5fN H=5 1舾t$HT$H=R 1nH<$ HtH9=if tfH$H dH3<%( v HX []A\A]A^A_IH\$0A>#( Dl$8f D D$D$= |$< t D$8L HD$(1ۃf(H$HuH9e hHp[ D@ tAH5xM H=3 *L$@ L 1H L艽wH\$0E1LD|$8Lt$ | D H9 Mt HcAD4A |$ &HH5 AHH H5 HJHÀ; A J HٽHHt CD= kMtHcHI fHHD$HL$QC/t?HD$8-Hdd H$H HD$LgH5K H=4 1H\$0LpL IHUI9GDMt DAUH|$ H\$E1LL, HѻIH x HPttH5g HHT$0Atv<,HT$0 ED A^ MtffAEAAuH\$ |$ J A At[MtɉAE H\$At-AtMtAE AA~MtfAEA MtfAEH VH5xJ H=92 1蚺
H MtxffAE*HHT$0膻HT$0HHtkAtAtH9'H5J H=x1 1)MA MA B MoAWH5I 1H=0 ԹG*AHT$H5I H=f H1褹ͺFHT$H5rI H=1 1| H\$0A TIH\$01LD$LH56I H=1 H)ڍJT$5L$HT$ED71H5I H=/
H5H H=g0 1cLH5H H=0 1H)ڍJT$ƸS謸f. f AWIAVIAUAATL%LW UH-LW SL)H觳Ht 1 LLDAHH9uH[]A\A]A^A_ff. HH LBA range descriptor %s: %ss too short (%d < 32)
%s cdb: %02x rt=0x%x at=0x%x tm=0x%x
sg_write_x.bin Wrote %u bytes to %s %s: out of memory
%s=
%s=%lu (origin 0)
lba=%lu [0x%lx]
%s: unable to open %s: %s
, line %d in %s
< Write atomic bad argument to '--grpnum'
bad argument to '--timeout='
Write same Write Orwrite Write scattered Write stream 1.19 20180628 sg_write_x version: %s
%s(%d) sg_set_binary_mode could not open %s for reading could not fstat %s missing device name!
open error: %s: %s
Read capacity(16) response:
%u low_ali_lba=%u
Read capacity(10) response:
Read capacity(10): %s
error: %d Read capacity(16): %s
bad argument to '--lba'
%s: error at pos %d
bad argument to '--num'
Unable to stat(%s) as SF: %s
IF c1 IF c2 + %d(PI) )
exiting ...
)
zero pad and continue ...
IF 3 SF exiting (strict=%d)
continuing ...
IF 4 How did we get here??
No %ss found in SF (num=%u)
IF 5 sg_fd close error: %s
sfr_fd close error infd close error sg_write_x failed: %s: array length exceeded
32 16 app-tag app_tag bmop bs combined dld dpo dry-run dry_run fua grpnum generation help lba normal offset quiet ref-tag ref_tag scat-file scat_file scat-raw scat_raw strict tag-mask tag_mask timeout unmap verbose version wrprotect %s: first 32 bytes of WRITE SCATTERED data-out buffer should be zero.
Found non-zero byte.
%s: degenerate %s stops scan at k=%d (num_rds=%d)
%s: %s %d non zero in reserved fields
%s: pad (%d bytes) following %ss is non zero
%s: about to return true, num_lbard=%u, sum_num=%u [k=%d, n=%d]
Usage:
sg_write_x [--16] [--32] [--app-tag=AT] [--atomic=AB] [--bmop=OP,PGP]
[--bs=BS] [--combined=DOF] [--dld=DLD] [--dpo] [--dry-run]
[--fua] [--generation=EOG,NOG] [--grpnum=GN] [--help] --in=IF
[--lba=LBA,LBA...] [--normal] [--num=NUM,NUM...]
[--offset=OFF[,DLEN]] [--or] [--quiet] [--ref-tag=RT]
[--same=NDOB] [--scat-file=SF] [--scat-raw] [--scattered=RD]
[--stream=ID] [--strict] [--tag-mask=TM] [--timeout=TO]
[--unmap=U_A] [--verbose] [--version] [--wrprotect=WRP]
DEVICE
Or the corresponding short option usage:
sg_write_x [-6] [-3] [-a AT] [-A AB] [-B OP,PGP] [-b BS] [-c DOF] [-D DLD]
[-d] [-x] [-f] [-G EOG,NOG] [-g GN] [-h] -i IF [-l LBA,LBA...]
[-N] [-n NUM,NUM...] [-o OFF[,DLEN]] [-O] [-Q] [-r RT] [-M NDOB]
[-q SF] [-R] [-S RD] [-T ID] [-s] [-t TM] [-I TO] [-u U_A] [-v]
[-V] [-w WPR] DEVICE
Use '-h' or '--help' for more help
where:
--16|-6 send 16 byte cdb variant (this is default action)
--32|-3 send 32 byte cdb variant of command (def: 16 byte)
--app-tag=AT|-a AT expected application tag field (def: 0xffff)
--atomic=AB|-A AB send WRITE ATOMIC command with AB being its
Atomic Boundary field (0 to 0xffff)
--bmop=OP,PGP|-p OP,PGP set BMOP field to OP and Previous
Generation Processing field to PGP
--bs=BS|-b BS block size (def: use READ CAPACITY), if power of
2: logical block size, otherwise: actual block size
--combined=DOF|-c DOF scatter list and data combined for WRITE
SCATTERED, data starting at offset DOF which
has units of sizeof(LB+PI); sizeof(PI)=8n or 0
--dld=DLD|-D DLD set duration limit descriptor (dld) bits (def: 0)
--dpo|-d set DPO (disable page out) field (def: clear)
--dry-run|-x exit just before sending SCSI write command
--fua|-f set FUA (force unit access) field (def: clear)
--generation=EOG,NOG set Expected ORWgeneration field to EOG
|-G EOG,NOG and New ORWgeneration field to NOG
--grpnum=GN|-g GN GN is group number field (def: 0, range: 0 to 31)
--help|-h use multiple times for different usage messages
--in=IF|-i IF IF is file to fetch NUM blocks of data from.
Blocks written to DEVICE. 1 or no blocks read
in the case of WRITE SAME
--lba=LBA,LBA... list of LBAs (Logical Block Addresses) to start
|-l LBA,LBA... writes (def: --lba=0). Alternative is --scat-file=SF
--normal|-N send 'normal' WRITE command (default when no other
command option given)
--num=NUM,NUM... NUM is number of logical blocks to write (def:
|-n NUM,NUM... --num=0). Number of block sent is sum of NUMs
--offset=OFF[,DLEN] OFF is byte offset in IF to start reading from
|-o OFF[,DLEN] (def: 0), then read DLEN bytes(def: rest of IF)
--or|-O send ORWRITE command
--quiet|-Q suppress some informational messages
--ref-tag=RT|-r RT expected reference tag field (def: 0xffffffff)
--same=NDOB|-M NDOB send WRITE SAME command. NDOB (no data out buffer)
can be either 0 (do send buffer) or 1 (don't)
--scat-file=SF|-q SF file containing LBA, NUM pairs, see manpage
--scat-raw|-R read --scat_file=SF as binary (def: ASCII hex)
--scattered=RD|-S RD send WRITE SCATTERED command with RD range
descriptors (RD can be 0 when --combined= given)
--stream=ID|-T ID send WRITE STREAM command with its STR_ID
field set to ID
--strict|-s exit if read less than requested from IF ;
require variety of WRITE to be given as option
--tag-mask=TM|-t TM tag mask field (def: 0xffff)
--timeout=TO|-I TO command timeout (unit: seconds) (def: 120)
--unmap=U_A|-u U_A 0 clears both UNMAP and ANCHOR bits (default),
1 sets UNMAP, 2 sets ANCHOR, 3 sets both
--verbose|-v increase verbosity
--version|-V print version string then exit
--wrprotect=WPR|-w WPR WPR is the WRPROTECT field value (def: 0)
Performs a SCSI WRITE (normal), ORWRITE, WRITE ATOMIC, WRITE SAME, WRITE
SCATTERED, or WRITE STREAM command. A 16 or 32 byte cdb variant can be
selected. The --in=IF option (data to be written) is required apart from
when --same=1 (i.e. when NDOB is set). If no WRITE variant option is given
then, in the absence of --strict, a (normal) WRITE is performed. Only WRITE
SCATTERED uses multiple LBAs and NUMs, or a SF file with multiple pairs.
The --num=NUM field defaults to 0 (do nothing) for safety. Using '-h'
multiple times shows the applicable options for each command variant.
WRITE ATOMIC (16 or 32) applicable options:
sg_write_x --atomic=AB --in=IF [--16] [--32] [--app-tag=AT] [--bs=BS]
[--dpo] [--fua] [--grpnum=GN] [--lba=LBA] [--num=NUM]
[--offset=OFF[,DLEN]] [--ref-tag=RT] [--strict] [--tag-mask=TM]
[--timeout=TO] [--wrprotect=WRP] DEVICE
normal WRITE (32) applicable options:
sg_write_x --normal --in=IF --32 [--app-tag=AT] [--bs=BS] [--dpo] [--fua]
[--grpnum=GN] [--lba=LBA] [--num=NUM] [--offset=OFF[,DLEN]]
[--ref-tag=RT] [--strict] [--tag-mask=TM] [--timeout=TO]
[--wrprotect=WRP] DEVICE
normal WRITE (16) applicable options:
sg_write_x --normal --in=IF [--16] [--bs=BS] [--dld=DLD] [--dpo] [--fua]
[--grpnum=GN] [--lba=LBA] [--num=NUM] [--offset=OFF[,DLEN]]
[--strict] [--timeout=TO] [--verbose] [--wrprotect=WRP] DEVICE
ORWRITE (32) applicable options:
sg_write_x --or --in=IF --32 [--bmop=OP,PGP] [--bs=BS] [--dpo] [--fua]
[--generation=EOG,NOG] [--grpnum=GN] [--lba=LBA] [--num=NUM]
[--offset=OFF{,DLEN]] [--strict] [--timeout=TO]
[--wrprotect=ORP] DEVICE
ORWRITE (16) applicable options:
sg_write_x --or --in=IF [--16] [--bs=BS] [--dpo] [--fua] [--grpnum=GN]
[--lba=LBA] [--num=NUM] [--offset=OFF[,DLEN]] [--strict]
[--timeout=TO] [--wrprotect=ORP] DEVICE
WRITE SAME (32) applicable options:
sg_write_x --same=NDOB --32 [--app-tag=AT] [--bs=BS] [--grpnum=GN]
[--in=IF] [--lba=LBA] [--num=NUM] [--offset=OFF[,DLEN]]
[--ref-tag=RT] [--strict] [--tag-mask=TM] [--timeout=TO]
[--unmap=U_A] [--wrprotect=WRP] DEVICE
WRITE SCATTERED (32) applicable options:
sg_write_x --scattered --in=IF --32 [--app-tag=AT] [--bs=BS]
[--combined=DOF] [--dpo] [--fua] [--grpnum=GN]
[--lba=LBA,LBA...] [--num=NUM,NUM...] [--offset=OFF[,DLEN]]
[--ref-tag=RT] [--scat-file=SF] [--scat-raw] [--strict]
[--tag-mask=TM] [--timeout=TO] [--wrprotect=WRP] DEVICE
WRITE SCATTERED (16) applicable options:
sg_write_x --scattered --in=IF [--bs=BS] [--combined=DOF] [--dld=DLD]
[--dpo] [--fua] [--grpnum=GN] [--lba=LBA,LBA...]
[--num=NUM,NUM...] [--offset=OFF[,DLEN]] [--scat-raw]
[--scat-file=SF] [--strict] [--timeout=TO] [--wrprotect=WRP]
DEVICE
WRITE STREAM (32) applicable options:
sg_write_x --stream=ID --in=IF --32 [--app-tag=AT] [--bs=BS] [--dpo]
[--fua] [--grpnum=GN] [--lba=LBA] [--num=NUM]
[--offset=OFF[,DLEN]] [--ref-tag=RT] [--strict] [--tag-mask=TM]
[--timeout=TO] [--verbose] [--wrprotect=WRP] DEVICE
WRITE STREAM (16) applicable options:
sg_write_x --stream=ID --in=IF [--16] [--bs=BS] [--dpo] [--fua]
[--grpnum=GN] [--lba=LBA] [--num=NUM] [--offset=OFF[,DLEN]]
[--strict] [--timeout=TO] [--wrprotect=WRP] DEVICE
Notes:
- all 32 byte cdb variants, apart from ORWRITE(32), need type 1, 2, or 3
protection information active on the DEVICE
- all commands can take one or more --verbose (-v) options and/or the
--dry-run option
- all WRITE X commands will accept --scat-file=SF and optionally --scat-raw
options but only the first lba,num pair is used (any more are ignored)
- when '--rscat-aw --scat-file=SF' are used then the binary format expected in
SF is as defined for the WRITE SCATTERED commands. That is 32 bytes
of zeros followed by the first LBA range descriptor followed by the
second LBA range descriptor, etc. Each LBA range descriptor is 32 bytes
long with an 8 byte LBA at offset 0 and a 4 byte number_of_logical_
blocks at offset 8 (both big endian). The 'pad' following the last LBA
range descriptor does not need to be given
- WRITE SCATTERED(32) additionally has expected initial LB reference tag,
application tag and LB application tag mask fields in the LBA range
descriptor. If --strict is given then all reserved fields are checked
for zeros, an error is generated for non zero bytes.
- when '--lba=LBA,LBA...' is used on commands other than WRITE SCATTERED
then only the first LBA value is used.
- when '--num=NUM,NUM...' is used on commands other than WRITE SCATTERED
then only the first NUM value is used.
- whenever '--lba=LBA,LBA...' is used then '--num=NUM,NUM...' should
also be used. Also they should have the same number of elements. Error doing read of %s file: %s
Short (%u) read of %s file, wanted %u
Need WRITE ATOMIC(32) since blocks exceed 65535
%s: bad cdb name or length (%d)
%s scatter list, number of %ss: %u
byte offset of data_to_write: %u, dout_len: %d
desc %d: LBA=0x%lx numblocks=%u%s Warning: possible clash of descriptor %u with data_to_write
Data-out buffer contents (first 1024 of %u bytes):
Above: dout's first 1024 of %u bytes [%s]
Data-out buffer contents (length=%u):
Exit just before sending %s due to --dry-run
, LB data offset: %u
Number of %ss: %u
%s: dout_len==0, so empty dout buffer
Medium or hardware error starting at Number of successfully written %ss is 0 or not reported
Number of successfully written %ss is %u
%s: t10_scat_list_out is too short
0123456789aAbBcCdDeEfFhHxXiIkKmMgGtTpP , %s: syntax error in %s at line %d, pos %d
%s: error reading NUM (second) item on %s: error reading item %d NUM item on %s: error with item 3, >0xffffffff; on %s: error with item 4, >0xffff; on %s: error with item 5, >0xffff; on %s: number exceeds 32 bits in line %d, at pos %d of %s
%s: error on line %d, at pos %d
%s: expect LBA,NUM pairs but decoded odd number
from %s
%s: error reading LBA (first) item on 36a:A:b:B:c:dD:Efg:G:hi:I:l:M:n:No:Oq:Qr:RsS:t:T:u:vVw:x bad argument to '--app-tag='. Expect 0 to 0xffff inclusive
bad argument to '--atomic='. Expect 0 to 0xffff inclusive
bad argument to '--bs='. Expect 0 or greater
warning: --bs=BS value is < 512 which seems too small, continue
warning: --bs=BS value is not a multiple of 8, unexpected, continue
bad first argument to '--bmop='
bad second argument to '--bmop='
bad argument to '--combined='. Expect 0 to 0x7fffffff
bad argument to '--dld=', expect 0 to 7 inclusive
bad first argument to '--generation='
bad second argument to '--generation='
need two arguments with --generation=EOG,NOG and they must be comma separated
only expect '--lba=' option once
bad argument to '--same', expect 0 or 1
only expect '--num=' option once
bad first argument to '--offset='
bad second argument to '--offset='
bad second argument to '--offset=', cannot exceed 32 bits
bad argument to '--ref-tag='. Expect 0 to 0xffffffff inclusive
bad argument to '--scattered='. Expect 0 to 0xffff inclusive
bad argument to '--tag-mask='. Expect 0 to 0xffff inclusive
bad argument to '--stream=', expect 0 to 65535
bad argument to '--unmap=', expect 0 to 3
bad argument to '--wrprotect'
unrecognised option code 0x%x ??
Unexpected extra argument: %s
Not in DEBUG mode, so '-vV' has no special action
Since neither --16 nor --32 given, choose --16
Since both --16 and --32 given, choose --32
Can only select one command; so only one of --atomic, --normal, --or,
--same=, --scattered= or --stream=
With --strict won't default to a normal WRITE, add --normal
No command selected so choose 'normal' WRITE
--combined=DOF only allowed with --scattered=RD (i.e. only with
WRITE SCATTERED command)
Ambiguous: got --combined=DOF and --scat-file=SF .
Give one, the other or neither
--scattered=RD --combined=DOF does not use --lba= or --num=
Please remove.
Ambiguous: don't expect --combined=DOF and --scat-raw
Give one or the other
--scat-raw only applies to the --scat-file=SF option
--scat-raw without the --scat-file=SF option is an error
want one and only one of: (--lba=LBA and/or --num=NUM), or
--scat-file=SF, or --combined=DOF
don't accept '-' (implying stdin) as a filename in --scat-file=SF
Need --if=FN option to be given, exiting.
To write zeros use --in=/dev/zero
Offset (%lu) is at or beyond IF byte length (%lu)
couldn't offset to required position on %s --offset [0x%lx] at or beyond file length[0x%lx]
after accounting for OFF, DLEN exceeds %s remaining length (%u bytes)
Moved IF byte pointer to %u, if_len=%u, if_readable_len=%u
--offset=OFF ignored when IF is stdin, pipe, socket, etc
DLEN, if given, is used
Read capacity(16) unit attention, try again
For data out buffer purposes the effective block size is %u (lb size
is %u) because PROT_EN=1, PI_EXP=%u and WRPROTECT>0
Read capacity(16) response fields:
--wrprotect (%d) expects PI but %s says it has none
... continue but could be dangerous
Last_LBA=0x%lx LB size: %u (with PI: %u) bytes p_type=%u
prot_en=%u [PI type=%u] p_i_exp=%u lbppb_exp=%u lbpme,rz=%u, Read capacity(16) not supported, try Read capacity(10)
Unable to calculate block size
Logic error, need block size by now
Error: number of bytes to read from IF [%u] is not a multiple
block size %u (including protection information)
Warning: number of bytes to read from IF [%u] is not a multiple
of actual block size %u; pad with zeros
'--lba' cannot be read from stdin
0123456789aAbBcCdDeEfFhHxXiIkKmMgGtTpP, build_lba_arr: error at pos %d
'--len' cannot be read from stdin
%s: number exceeds 32 bits at pos %d
need same number of arguments to '--lba=' and '--num=' options
won't write %u blocks without an explicit --lba= option
Expect scatter file to be a regular file
Failed to open %s for raw read: %s
With --combined= if DOF, RD are 0 and IF has an unknown length
then give up
unable to allocate aligned memory for scatterlist+data
%s: Cannot fit %ss (%u) in given LB data offset (%u)
%s: empty blocks before LB data offset (%u), could be okay
Exiting due to --strict; perhaps try again with --combined=%u
unable to allocate memory for final scatterlist+data
DLEN > than bytes implied by sum of scatter list NUMs (%u)
num_lbard=%u, sum_num=%u actual_bs=%u readable length (%u) of IF %s bytes implied by sum of
scatter list NUMs (%u) and DLEN
Calculated data-out length (0x%x) not a multiple of BS (%u SF not long enough (%u bytes) to provide RD (%u) %ss
Try again with --scattered=%u
IF length (%u) %s 'sum_num' bytes (%u), %s: number given to --scattered= (%u) exceeds number of --lba= elements (%u)
warning: %d LBA,number_of_blocks pairs found, only taking first
after build_t10_scat, num_lbard=%u, sum_num=%u
Unable to decode one LBA range descriptor from %s
raw scatter file must be at least 64 bytes long (length: %u)
No LBA or number_of_blocks given, try using --lba= and --num=
unable to allocate %u bytes of memory
Some error occurred, try again with '-v' or '-vv' for more information
build_lba_arr: array length exceeded
--app-tag=, --ref-tag= and --tag-mask= options ignored with 16 byte commands
Calculated dout length (%u) %s bytes available in IF (%u)
RD (%u) %s number of %ss (%u) found in IF
RD (%u) %s number of %ss (%u) found in SF
uezezuezezezezezezezez2uez*zyezyezezSyez%yezezezxxxezxxXx xezxezezezezezezezezezezwwwwezvwGw:w&wezez wezvvezxvWvJv&vuuuudo_write_x check_lbrds parse_scat_pi_line build_t10_scat process_scattered build_num_arr ;l (k n 8rp X H , P X خ (P zR x ȝ/ D $ 4 j FJ w ?:*3$" \ m H t ` BEE B(D0D8D`
8C0A(B BBBA Ԡ hm
E X 4 @k AFG V
AAA c
CAE \ xP BIB B(A0C8G
8A0A(B BBBA LIA 4 | hv AAG v
FAJ D
CAH L D BBB B(D0A8G
8A0A(B BBBA o , FPN E(D0H8Gs
8A0A(B BBBA fPAENAUOA4KPB<AeAKOADaBBTB D гe FEE E(H0H8G@n8A0A(B BBB , L PL ) X
d o 0 p
@ P o o
o o d
o + 0 @ P ` p 0 @ P ` p 0 @ P ` p 5i 3 8i 6 ;i a Ci a !f A Ki B Pi b Si c \i D `i d di x li x ti f xi g i G i h ~e i i l i N {i n i o h O i Q i r i r hf M i q i q i R i R f S f T i s i t i t i I i u j v j V j w GA$3a1 X K GA$3p1029 td GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: annobin GA$running gcc 8.5.0 20210514 GA* GA* GA!
GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*GOW * GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign GA$3a1 K e GA$3p1029 d d GA* GA$annobin gcc 8.5.0 20210514 GA$plugin name: annobin GA$running gcc 8.5.0 20210514 GA* GA* GA!
GA*FORTIFY GA+GLIBCXX_ASSERTIONS GA*GOW *E GA*cf_protection GA+omit_frame_pointer GA+stack_clash GA!stack_realign
GA*FORTIFY L td GA+GLIBCXX_ASSERTIONS
GA*FORTIFY d d GA+GLIBCXX_ASSERTIONS sg_write_x-1.44-6.el8.x86_64.debug %7zXZ ִF ! t/] ?Eh=ڊ2N_2 ZMN˖ A 1GkБ
P>ͫ QK;!> H33E+h;PYc 4!ɿC"^ZS;R]`sF~d"6,C*<
uY5?ūluywMSҝN *Dm ~'ԯ":ȠK?GM''.<
$ɔ¨<2L8אԵ />oM#iJ rD]n#D tB3q"@@erә'r̤ta6:l` 6kXwBqJ3*UC_fuȨ>BYm'*``y
S2? ,d_K
i
O;]0ǔ. OTd6=PlS793MM2%eS0L7&>mÅoVgYlH] n$d@2lt#$E ! 7ag YZ .shstrtab .interp .note.gnu.property .note.ABI-tag .note.gnu.build-id .gnu.hash .dynsym .dynstr .gnu.version .gnu.version_r .rela.dyn .rela.plt .init .plt.sec .text .fini .rodata .eh_frame_hdr .eh_frame .init_array .fini_array .data.rel.ro .dynamic .got .data .bss .gnu.build.attributes .gnu_debuglink .gnu_debugdata & 4 $ G o 0 0 < Q p p H Y a o d
d
n o
` } P P B @ X X eE d d
e e FH X X l ȭ ȭ @ @ @ @
`` @ ( / >